NEC / Sharp Display Input Configuration

Created by John Pasternack, Modified on Fri, 20 Mar at 12:44 PM by John Pasternack

If you are experiencing "No Signal" on an NEC (i.e. NEC M491), or Sharp Display but you have the correct source selected, you need to configure the correct MODE in the monitor's Input settings.

Here is a link to the User Manual:
https://assets.sharpnecdisplays.us/documents/usermanuals/m431-m491-m551-m651-usermanual-english.pdf

Scroll to Page 81 (labeled Page 77 at the bottom)

Here's a summary:

1) Go to the Input Menu
2) Press SET
3) Go to the ADVANCED SETTINGS
4) Select MODE1

If MODE1 does not work, select MODE2